|
Separation and Concentration Equipment at IMP Pilot Plant
Click on snapshot for larger
image
IMP pilot plant facility: Heavy Media
separation |
IMP pilot plant facility: Diester Table |
Pilot Plant Separation and Concentration Equipment
Physical beneficiation techniques incorporating gravity
separation, magnetic separation, and electrostatic separation
are available. Equipment includes air classification, air and wet
concentrating tables, jigs, spirals, hydrocyclones,
heavy media cyclone and vessel, wet magnetic drum, dry rare earth, etc.
The focus of these separation techniques is to define and utilize
differences in physical properties of materials as the basis for
separation.
To
the Dewatering, Agglomeration and Thermal
Curing Page
GRAVITY CONCENTRATION
- (1) 3 ft WEMCO HMS cone
- (1) 4 ft x 4 ft dia HMS drums
- (1) 6 in Dynawhirlpool HMS
- (1) Siphon sizer, Dorr-Oliver, 36"
- (2) Spirals, Humphreys, 24" dia
- (1) Hydroclassifier, Denver, 36" dia
- (1) Hydroseparator, 24" dia
- (1) Mineral jig, Denver, 8" x 12"
- (1) Mineral jig, Denver, 4" x 6"
- (1) Woodbury jig, 16" x 23"
- (1) Wilfley table, Massco, double deck, 40" x 18"
- (1) Wilfley table, Massco, single deck, 50" x 24"
- (4) Water elutriation columns, 3", 4", 5", and 6" dia
- (1) Hr 6" HMS Dorrclone
- (3) Marcy direct reading density scales
- (1) Nuclear-Chicago density gauge
- (1) WEMCO rising current classifier
- (1) 30" mechanical gold pan (Met)
- (1) Deister Table w/sand deck
MAGNETIC CONCENTRATION
- (2) Wet drum cleaner, Dings, 24" dia x 12" XW3
- (1) Wet drum cobber, Jeffrey, type SS421, 30" dia x 18"
- (1) Wet 2-drum finisher, Dings, type 30 x 18W, 30" dia x 18"
- (1) Wet drum separator, Jeffrey, model 1510, permanent magnetic,
15" dia x 10"
- (1) Wet drum separator, Dings, 9" dia x 12"
- (1) Wet 2-drum finisher, Jeffrey, 12" dia x 4"
- (1) Dry belt cobber, Dings, type 15 x 16 MPTS, 15" dia x 16", 2 x
1/8"
- (1) Dry belt separator, Eriez MMS, model A30194, sytle 696,
14", 2" x 1/8"
- (1) Dry high intensity Carpco induced roll separator, model
121B 35 x 100 mesh
- (1) Magnetizing block, Dings, type 12 PM
- (1) Demagnetizing coil, 400 cycles, 3"
- (1) Demagnetizing coil, Dings, 9 AMP, 4-5/8" I.D.
- (4) Demagnetizing coils, 60 cycles, 3" and 4"
- (1) 400 cycle A.C. generator, American Electric Motors
Back to IMP Pilot Plant Page
Back to IMP Capabilities Page
| For More Information contact: |
| Dr. Jim Hwang, Director |
| Voice:(906) 487-2600 | Michigan Technological University
|
| Fax:(906) 487-2921 | Institute of Materials Processing
|
| E-mail: jhwang@mtu.edu
| Houghton, Mi. 49931 |
Copyright 2000 Institute of Materials Processing (IMP) Michigan
Technological
University
Michigan Technological University is an equal
opportunity
educational institution/equal opportunity employer.
|