|
Vacuum Caster
- This unit was rebuilt by Ionex Corp. of Charlevoix, MI. in 1992.
- The vacuum chamber is approximately 32 inches in diameter and 32
inches in length.
- The chamber is equipped with separate manipulators for pouring the
melt and the alloying elements.
- There is a retractable thermocouple probe built into the unit. There
is also and optical sight glass port for use with a pyrometer.
- The chamber is equipped with a Sergeant-Welch roughing pump and a 6
inch diffusion pump. Pumping sequence and levels are controlled by a
Granville Phillips 307 Vacuum Gauge Controller. Automatic valves are
also in place for purging and backfilling the chamber with inert gas.
- The vacuum caster is equipped with an Inductotherm Powertrak model
20-96 power supply.
- The induction coil will accept crucibles up to 4 inches in diameter
and 7 inches in length.
- The vacuum chamber is equipped with a mold manipulation device and
will accept molds up to 11 inches in diameter.
|